China Rsic Recrystallized Silicon Carbide Sic Rod axle shaft collar

Merchandise Description

Sic Silicon Carbide Tubes

Recrystallized silicon carbide goods are higher-tech silicon carbide materials shaped by mixing substantial-purity silicon carbide coarse powder and high-activity silicon carbide fine powder, and soon after grouting, vacuum sintering at 2450 ° C to recrystallize.

 Recrystallized silicon carbide products have superb homes this sort of as high temperature power, gentle weight, good thermal conductivity, little warmth storage, and extended existence. They are broadly employed in ceramics, petrochemical, aerospace and other industrial sectors. Utilised for producing ceramic pottery (rollers, beams, slabs, high-temperature burners, thermocouple defense tubes, and so on.). Amongst them, the most common use is as higher-temperature kiln household furniture for different industrial kiln, particularly appropriate for use underneath substantial temperature situations previously mentioned 1250C. Making use of RSIC kiln household furniture can considerably enhance the filling performance and preserve vitality intake.
 

Merchandise Device Data
Bulk density g/cm3 two.sixty-2.seventy four
Porosity % 15
Compression strength MPa ≥600
Flexural energy MPa 90-one hundred
Young modulus Gpa 240
Thermal conductivity W/MK 24
Coefficient of thermal expansion twenty-1000C ten-sixK-one 4.8
Max using temperature C 1650
SiC % ninety eight.5

Silicon nitride bonded silicon carbide products:

Silicon nitride (Si3N4, Sic) ceramic refractory components, mainly employing silicon nitride (23%) and silicon carbide as the main uncooked supplies, with natural materials, mixed, extruded or casted, dried,nitrided.

Si3n4 bonded SiC is a new type of refractory. It has a vast assortment of uses, with a temperature of 1400C. It has better thermal stability, better thermal shock resistance than normal refractory components and recrystallized Sic, acid and alkali resistance, use resistance, and high flexural energy. It is resistant to erosion, non-air pollution, and fast warmth conduction in molten metals this sort of as aluminum (Al), lead (Pb), zinc (Zn), and copper (Cu). Its requirements:

1.Thermocouple security tube:diameter Φ12-80mm,size 1800mm,utilised in higher temperature kiln and various atmospheres, can also be utilised right in molten liquid.

2. Riser tube, heating sheath, defense tube: used in aluminum liquid and glass liquid,it has great thermal conductivity, corrosion resistance, force resistance, lengthy lifestyle and so on.

3.Raceway tube: utilized on floor and brick kiln, diameter thirty-50mm, size considerably less than 1600mm, higher temperature resistance, no deformation, higher toughness.

four.Kilns: Beams made of silicon nitride bonded silicon carbide are utilised in tunnel kiln, shuttle kiln, down-fired kiln, and have very good load carrying capacity. It is best to make entire use of kiln room to boost kiln output, at the exact same time can decide on to use the column as a assistance body, the use temperature can attain 1400C. Without having growing too much expenditure, the purpose of bettering solution good quality, conserving strength and growing production can be achieved, and it is an best substitution.

five.Various refractory parts: It has characteristics of shock resistance,large temperature resistance,put on resistance,very good resistance to sudden adjustments, and is suited for warmth exchangers, chilly air pipes, burners, crucibles, and so on.
 

Merchandise Device Knowledge
Bulk density g/cm3 2.75-2.eighty two
Porosity % ten-twelve
Compression energy MPa 600-700
Flexural toughness MPa 160-a hundred and eighty
Younger modulus Gpa 220-260
Thermal conductivity W/MK 15
Coefficient of thermal enlargement twenty-1000C 10-sixK-one 5.
Max temperature C 1500
SiC % 60-eighty
Si3N4            % twenty-40

Application: Refractory, Structure Ceramic, Industrial Ceramic
Material: Sic
Type: Ceramic Tubes
Color: Black Shining
Shape: Square,Tubular,Oval,Rectangular,Half
Use: Thermocouples,Furnace,Temperature Measurement

###

Customization:

###

Item Unit Data
Bulk density g/cm3 2.60-2.74
Porosity % 15
Compression strength MPa 600
Flexural strength MPa 90-100
Young modulus Gpa 240
Thermal conductivity W/MK 24
Coefficient of thermal expansion 20-1000C 10-6K-1 4.8
Max using temperature C 1650
SiC % 98.5

###

Item Unit Data
Bulk density g/cm3 2.75-2.82
Porosity % 10-12
Compression strength MPa 600-700
Flexural strength MPa 160-180
Young modulus Gpa 220-260
Thermal conductivity W/MK 15
Coefficient of thermal expansion 20-1000C 10-6K-1 5.0
Max temperature C 1500
SiC % 60-80
Si3N4            % 20-40
Application: Refractory, Structure Ceramic, Industrial Ceramic
Material: Sic
Type: Ceramic Tubes
Color: Black Shining
Shape: Square,Tubular,Oval,Rectangular,Half
Use: Thermocouples,Furnace,Temperature Measurement

###

Customization:

###

Item Unit Data
Bulk density g/cm3 2.60-2.74
Porosity % 15
Compression strength MPa 600
Flexural strength MPa 90-100
Young modulus Gpa 240
Thermal conductivity W/MK 24
Coefficient of thermal expansion 20-1000C 10-6K-1 4.8
Max using temperature C 1650
SiC % 98.5

###

Item Unit Data
Bulk density g/cm3 2.75-2.82
Porosity % 10-12
Compression strength MPa 600-700
Flexural strength MPa 160-180
Young modulus Gpa 220-260
Thermal conductivity W/MK 15
Coefficient of thermal expansion 20-1000C 10-6K-1 5.0
Max temperature C 1500
SiC % 60-80
Si3N4            % 20-40

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.
Shaft Collar

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Shaft Collar

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Shaft Collar

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
China Rsic Recrystallized Silicon Carbide Sic Rod     axle shaft collarChina Rsic Recrystallized Silicon Carbide Sic Rod     axle shaft collar
editor by czh 2023-01-27